Pulsed Electromagnetic Field (PEMF)
In the 21st Century, people and animals are continually exposed to damaging electromagnetic fields (EMF), limiting their exposure to Earth's vital pulsed electromagnetic fields (PEMF). Pulsed Harmonix's TruePulse A2000 releases a series of carefully-timed pulses that closely resemble earth's naturally occuring PEMFs, revitalizing body tissue at the cellular level.
Pulsed Electromagnetic Field Therapy (PEMFT)
Pulsed Electromagnetic Field Therapy (PEMFT) is recognized around the world for its remarkable healing abilities in both humans and animals. PEMFT uses a gentle electrical current to direct a series of magnetic pulses through damaged tissue, inducing tiny electrical signals that stimulate cellular repair.
Dr. Oz on the benefits of Pulsed Electromagnetic Therapy (PEMFT)
The Pulsed harmonix A2000:
How the A2000 Works:
The A2000 pulsed electromagnetic field (PEMF) device produces a magnetic field in its applicator coils that varies over time, pulsing like a heartbeat to provide a therapeutic effect.
The Magnetic Field:
The A2000s applicator coil produces the magnetic current behind each pulse, a microprocessor times the current, and the user adjusts the intensity via the control panel.
Current & the Magnetic Field:
The magnetic field is proportional to the current in the applicator wire: a zero current results in zero fields, and a high current produces a high magnetic field; double the current, and you doubles the field.
To adjust the intensity of each pulse, select the intensity "Increase" or "Decrease" buttons on the A2000 control panel. The energy needed to drive each pulse accumulates at a constant rate, and the energy of each pulse is proportional to the time between pulses, i.e., the longer the time between pulses, the stronger the pulse.
The Gentle "Clicking" Sound:
The peak current in each pulse causes the coil wires to slap together creating a light ticking sound. These pulses are brief, lasting 1 to 2 thousandth of a second, regardless of intensity.
Binding the Coils
By design, only the applicator’s coil has a strong directed magnetic field; the twisted leads do not have a significant field since they are close together and the flow of current is opposite in each lead, canceling the magnetic field. The coil’s field strength is proportional to the number of wire turns forming the coil, e.g., double the turns and you double the field, all-else being equal.
During pulsing operation, the higher the pulse current, the higher the heat produced in the copper wire: double the current and four times as much heating energy goes into the applicator. The longer the pulsing, the warmer the applicator coil will get. It never gets hot but warms to the touch. This can be soothing heat for the application area, similar to a heating pad.
When using PEMF therapy for the first time, it is important to begin at a low level, as every person responds differently. Initial users are encouraged to use the default Level 3 Intensity for 15 minutes in the morning and 15 minutes in the evening for three days before increasing the strength and duration of sessions. Duration and intensity determine how much magnetic energy users absorb, e.g., double the length time or the intensity and you double the energy absorption. In fact, there is a 50 to 1 difference in the peak pulse energy between the Level 1 and the Level 15 intensity, e.g., the Intensity is approximately double for each two steps up in intensity.
Most users easily tolerate up to an hour of treatment. High intensities have a pronounced impact on inflammation, and the histamine response to injury. Higher intensities also allow for shorter sessions. For a given outcome, higher intensity often enables a shortening of the session time.
When two people are using the same device, higher intensities, e.g. three steps higher, will evenly distribute the shared energy.
- Mike Kolesar, Pulsed Harmonix Chief Technology Officer
Copyright All Rights Reserved © 2014-2015 PIEMF, LLC